Pimpernel lampshade William Morris sage green lamp shade Art Nouveau floral

  
Round drum-shaped lampshade, covered by hand in a William Morris fabric in a sage green colourway. This would be at home in both traditional and modern interiors due to its timeless elegance.

Liner/inside colour is white; this gives you maximum brightness when lit, as it allows the light to shine through the fabric. The rigid body of the shade is covered with a high quality 100% cotton fabric and attached to metal rings top and bottom, the top edges are then rolled and tucked under. These are handmade in my home studio in Chester, UK. Pattern placement will vary slightly, particularly on smaller sizes. There will be a small joining seam at the back where the pattern will not match.

15cm (6") diameter x15cm (6") high. 20cm (8") diameter x 18cm (7") high. 25cm (10") diameter x 20cm (8") high. 28cm (11") diameter x 21cm (8.5") high. 30cm (12") diameter x 21cm (8.5") high.

35cm (14") diameters x 25cm (10") high. UK/EU LAMP fitting for EU style standard or floor lamps (hole for bulb at the bottom of the shade, hole is 40mm diameter with a 25mm converter plug). CEILING or pendant lamp fitting (hole for bulb at the top of the shade).

Feel free to contact me for help or advice. This is for a shade only, not any electrical fittings. Tested for fire resistance to comply with BS EN 60598-1-2008, the British Standard for Luminaries. The PVC liner material has been tested in the Lighting Association Laboratories and has passed the glow wire test. Maximum recommended bulb wattage for 15cm is 40w, then 60w for larger sizes.

Low energy bulbs reduce the risk of scorching.